Manual — Certification

Laatste update: 02/11/2026

Kies in het printvenster bij bestemming "Bewaar als PDF". Deze pagina wordt opgebouwd uit de actuele handleiding, dus je krijgt altijd de nieuwste versie.

Afgedrukt op 21 November 2026.

Laatste update: 02/11/2026

De certificatiemodule bouwt je dossier op voor een erkend duurzaamheidslabel. Vandaag is dat het EU Ecolabel: 67 criteria, 142 afzonderlijke verklaringen, een officieel verificatieformulier en een map bewijsstukken. De module houdt dat bij, vult in wat ze uit je eigen gegevens kan halen, en levert op het einde het pakket dat je bij de bevoegde instantie indient.

Je hoeft niet alles in één keer te doen. Alles wordt bewaard per werkjaar, en je kan elk antwoord later herzien.

Vijf uitgangspunten

Jij verklaart, de instantie beslist. De module zegt nooit dat je aan een criterium voldoet. Ze houdt bij wat jij verklaart en welk bewijs daarbij hoort. De bevoegde instantie beoordeelt, met een controle ter plaatse. Ook een AI-suggestie is nooit een antwoord: die moet je bevestigen.

“Nee” is een volwaardig antwoord. Een criterium waaraan je niet voldoet, mag je gewoon met nee afwerken. Daarom houdt de module twee dingen apart: afgewerkt (je hebt het bekeken en beantwoord) en in orde (je voldoet er ook aan). Een dossier waarin alles op ja staat maar niets klopt, helpt je niet door een audit.

Hergebruiken wat er al is. Je energie, water en CO₂ komen uit je voetafdruk. Je documenten worden gelezen en aan criteria voorgesteld. Voor zestien verklaringen zetten we een tekstvoorstel klaar dat je aanpast en bevestigt. Wat we kunnen invullen, vullen we in.

Niets is verplicht om te beginnen. De profielcheck vraagt zeven dingen en slaat op basis daarvan de criteria over die niet op jou van toepassing zijn. Wat je niet hebt, vragen we niet.

Eerlijk over wat we niet weten. Prijzen zijn indicaties met de aanname erbij. Waar de regelgeving of de opvolgingsfrequentie niet met zekerheid vaststaat, staat dat er.

Hoe het in elkaar zit

StapWat er gebeurt
Traject openenDe module werkt op uitnodiging. Staat je traject niet open, dan kan je begeleiding aanvragen.
ProfielcheckZeven vragen over je logies. Bepaalt welke optionele criteria wegvallen.
DashboardWaar je staat: verplichte criteria, punten tegenover de drempel, prijs, en het proces.
WizardPer thema de criteria beantwoorden, met sjabloonteksten en autofill uit je meetdata.
BewijsDocumenten koppelen aan de verklaringen waarvoor ze dienen.
IndienpakketHet officiële verificatieformulier plus een bewijzen-zip, klaar om in te dienen.

De 67 criteria zijn verdeeld over zeven thema’s: Energie & CO₂ (21 criteria), Aankoop & verbruik (13), Water & afvalwater (11), Leefomgeving & buiten (9), Algemeen beheer (7), Afval (4) en Gasten & communicatie (2).

Green Key

De module is gebouwd rond EU Ecolabel. Green Key kan je aanvragen en je ziet het label staan, maar de begeleiding erachter bestaat nog niet: de criterialijst, de wizard en het indienpakket zijn op EU Ecolabel gebouwd. Kies je in de keuzehulp voor Green Key, dan zegt de module dat ook letterlijk in plaats van je in het verkeerde traject te zetten. Wanneer Green Key volgt, is niet vastgelegd.

Wie mag wat

Lezen mag iedereen met toegang tot het logies. Antwoorden invullen en bewijs koppelen kan alleen wie schrijfrecht heeft: de eigenaar, of iemand met wie het logies met schrijfrecht gedeeld is. Zonder schrijfrecht blijven de knoppen weg en staat de reden eronder.

Quick start with your file

Laatste update: 02/11/2026

Your first session doesn’t have to take long. In about an hour, you’ll have a profile, an initial overview of where you stand, and one theme completed. The file itself spans weeks, not just one evening.

Where to find it

  1. Open Certification in the menu.
  2. Choose the accommodation at the top for which you want a label.
  3. You’ll arrive at the dashboard for that accommodation.

If your process isn’t open yet, you’ll see an explanation instead of the dashboard with the button Request guidance. See Access to the process.

The first session

StepDurationWhat you do
15 minProfile check completion: seven yes-or-no questions about your accommodation. This immediately removes criteria that don’t apply to you.
25 minAccept Autofill: if a published year is in your footprint, then energy, CO₂, renewables, and water are ready.
310 minGather documents: drop what you already have into the document file — EPC, inspection certificates, invoices, your cleaning contract. The module reads them and suggests them for criteria.
425 minComplete one theme in the wizard. Start with General management: seven criteria, many template texts, little technical detail.
55 minBack to the dashboard and see where you stand.

What you’re starting

Don’t start with Energy & CO₂. That’s the largest theme (21 criteria) and the most technical. General management and Guests & communication together are nine criteria, mostly policy and information, and most text suggestions are ready there.

If you don’t have a footprint for this accommodation yet, do that first. Not because you have to, but because a lot of criteria regarding energy and water will then be filled in automatically. Without a footprint, you fill them in manually.

What not to do in the first session

  • Don’t set everything to yes just to move forward. No is a valid answer, and a false yes will come to light during the on-site inspection.
  • Don’t generate a submission package yet. That’s the final step; the form builds on your answers.
  • Don’t wait until you have everything. A half-completed file is useful: the dashboard shows what’s still needed.

Access to the process

Laatste update: 02/11/2026

The certification module works by invitation. An administrator opens the label for each accommodation. This is a deliberate choice: a label process involves guided work, and a file that stalls halfway through helps no one.

What you see without an open process

You will see the module, but without criteria, scores, or numbers. Instead, you’ll find an explanation about the label and two buttons: Request guidance and a link to the selection tool if you’re not yet sure if this label is right for you.

That is by design. As long as the process isn’t open, a score would give you the wrong impression: the profile check hasn’t happened, your documents haven’t been read, and no one has agreed with you on which year you are tackling.

Requesting guidance

Click on Request guidance. Three things then happen: your request is saved, a message is sent to us, and the request is added to your accommodation’s history. You can also withdraw it using Withdraw request.

What happens next depends on the conversation, not the software. A request is not an automatic approval.

What opens up

As soon as an administrator enables the label, the full dashboard appears: the profile check, the seven theme cards, the score, the price indication, and the submission package. The criteria themselves come from the shared catalog, so you don’t start from scratch: everything the module can pull from your footprint and documents is already there.

Labels you already have

If you already have a label, it belongs in your core data under Previously obtained labels, including the start year. The module uses this to determine if your application is a first-time application or a renewal, so it won’t ask that question again in the wizard. On the dashboard, this is shown as First application — no EU Ecolabel held yet or Renewal — EU Ecolabel already held.

Declaring that you hold a label is not the same as an open process. The first is your declaration; the second is guidance that we open up. Declaring a label does not automatically grant access to the wizard.

The profile check

Laatste update: 02/11/2026

Out of the 67 criteria, there are a lot that don’t apply to your accommodation. No staff means no staff training, no swimming pool means no swimming pool criteria. The profile check asks this once, instead of letting you scroll through dozens of questions that you have to close with “not applicable.”

Where to find it

  1. Open Certification and choose your accommodation.
  2. At the top of the dashboard is the Profile check card.
  3. Click on Start or Tell us briefly about your accommodation.

The seven questions

QuestionWhat a “no” does
Do you employ staff?Criteria about staff training and social benefits are removed as optional work.
Do you serve meals or drinks to guests (breakfast counts)?Criteria about food, kitchen, and kitchen waste are removed.
Is there a swimming pool?The swimming pool criteria are removed. A swimming pond does not count as a swimming pool here.
Is there air conditioning?The cooling criteria are removed.
Is there a garden or outdoor space that you manage?Criteria about garden maintenance, watering, and pesticides are removed.
Do you heat with wood or pellets?The criteria about solid fuel are removed.
Are there electric hand dryers in the sanitary areas?Criterion 36 is removed.

The module deduces some things itself and doesn’t ask them. A B&B serves breakfast according to the Accommodation Decree, so that is already checked. If you have fewer than fifteen rooms, we skip criteria 23 and 24: EMAS and ISO 14001 are practically only feasible for larger organizations.

What the check doesn’t do

Mandatory criteria always remain. Only optional criteria are skipped. If you have no staff, the mandatory criterion about it does not disappear — you answer it, if necessary with “no staff” as an explanation. That is exactly what an inspector wants to see: an answer, not a gap.

Absence is never certain. Just because you don’t have gas in your measurement data doesn’t mean you don’t use gas. That’s why we ask it instead of concluding it.

Review

The check is a single moment of confirmation, not a lock. If something changes — you hire staff, you install a pool — then you adjust the check and those criteria return. In the wizard, a skipped criterion shows a message with the reason and a button to show them anyway, so you’re never stuck with an answer the module came up with for you.

The dashboard

Laatste update: 02/11/2026

The dashboard answers one question: how far along am I, and what is the next meaningful step? It doesn’t calculate anything that you can’t verify yourself.

The four quadrants

Mandatory criteria. How many of the 22 mandatory criteria have been completed, and how many of those are also in order. This is a gateway: a single mandatory criterion that is not in order will hold up your entire application. Hence the red bar.

Optional criteria. How many points you have collected out of the 45 optional criteria, compared to the threshold of 32 points. The bar shows where that threshold lies.

Estimated price. An indication based on your company size, with the assumption listed below. You can switch between micro, SME, and large yourself to see the difference. It is not a quote.

Process. The five steps from file to logo, including the Belgian competent authority: the FPS Public Health, Food Chain Safety and Environment, via ecolabel.be. Step three is an assessment with an on-site inspection.

The cards below

CardPurpose
Profile checkThe seven questions. If not filled in, it will say so with a start button.
DocumentsWhat you already have, and which documents could serve which criteria. Use Manage documents to open the document file for your accommodation.
Points for improvementCriteria that you have completed but do not meet: red for mandatory, amber for optional, with a button to go there immediately.
Submission packageGenerate the verification form and the evidence zip file.

At the top is a strip showing what is ready to be imported from your footprint: energy consumption, CO₂ footprint, share of renewables, and water consumption. If you don’t have a published year yet, it will say that you should start that first.

Reporting to the competent authority

If you have the EU Ecolabel, you must submit your consumption data and your internal evaluation report to the competent authority every two years (criterion 5.2), for the first time within two years of your application. The Reporting to the competent authority card is at the bottom of the dashboard for this purpose. When collapsed, it shows your next deadline; use Details to open it.

  • Application date. The cycle starts here. If you have had the label for some time, enter the original application date; the platform will calculate your next deadline. You can also enter the same date in your accommodation form, under Labels already obtained.
  • Assemble the package. You will receive a zip file with your consumption data from the last two published years, your objectives and their status, your sustainability report if you had one made, and a cover letter. If anything is missing, the card will tell you.
  • Register as sent. You send the package yourself. Then enter the date and the recipient here. This is your declaration: the platform cannot see if the email has actually been sent.

As soon as your application date is filled in, declaration 5.2 in the wizard will automatically be set to yes. If a deadline passes without a registered submission, this will be stated literally in the explanation for 5.2 and the card will turn red.

Waste and chemical products are not included in the package, as the platform does not measure them. Criterion 5 does ask for them; you provide those yourself. The cover letter mentions this.

You can also receive a reminder email; see Emails you may receive.

The theme cards

Seven cards, one per theme, in the order in which they usually yield the most: Energy & CO₂, Water & wastewater, Waste, Purchasing & consumption, Environment & outdoors, Guests & communication, General management. For each card, you can see how many criteria are completed, how many are in order, and how many points you earned out of the total possible. The entire card is clickable.

The color codes on the cards indicate the type of work involved: Quick win, Doable, Investment, Skip and N/A. This is an estimate to help you choose where to start, not a judgment on the criterion.

Two counts side by side, and that is intentional. Completed means: reviewed and answered, ready to submit. In order means: you also comply with it. See Mandatory, optional and the threshold.

The wizard: answering criteria

Laatste update: 02/11/2026

The wizard is where the work happens. You open a theme and work through the criteria, each with one or more statements below it. In total, there are 67 criteria with 142 statements; these statements are exactly what appears on the official verification form.

Where to find it

  1. On the dashboard, click on a theme card.
  2. The first criterion that hasn’t been completed yet will be open.
  3. At the bottom, use Done — back to overview to return to the dashboard.

How to answer

Each statement has actual answer buttons, not a free text field where you have to make something up.

TypeHow it works
Yes / No / To check110 statements. To check resets the answer to open, even if you already chose yes or no.
Selection list14 statements with a fixed list, in Dutch.
Number or percentage18 statements. You enter your own figure and the module tells you which official bracket it falls into.
Not applicableOnly where officially permitted, or where it follows from your profile. Includes a mandatory field for the reason.

Under each statement, there is a comment field for an explanation or reference. You can expand the original English text from the decision, along with what an auditor wants to see.

Automatically filled in

Some statements are immediately set to In order — automatic, including the source: your published footprint, or your EMAS/ISO registration. You can always override this yourself using Adjust. Two things to know: automatic only works with a published year, and where a document is mandatory, a statement won’t show as ‘in order’ until that evidence is provided.

For some statements, you’ll get a hint from an external source: your water hardness according to the VMM based on your municipality, a green power check at the VREG based on your EAN, or a link to the ‘groenblauwpeil’ (green-blue level) of your address. These hints don’t fill anything in; they help you find the right answer.

Two cases you will definitely encounter. For 5.1, how often you monitor your consumption, the platform fills in the answer based on your footprint: monthly figures result in ‘monthly’, only annual figures result in ‘annually’. The explanation states what this is based on, and that waste and chemical products are not included; you check those yourself. 5.2, the biennial reporting to the competent authority, only gets a ‘yes’ once you have entered your application date. See The dashboard.

Under criterion 1, you’ll find the worksheet with your objectives. Statements 1.3 and 1.4 are not automatically checked off from there: you do that yourself, with Confirm as answer to 1.3 and 1.4. See Worksheets and checklists.

A Green Key report as a starting point

If you already have a Green Key audit report, upload it to your documents. The platform recognizes the report and the Green Key version itself, and prepares an explanation from that report for the corresponding EU statements. This happens during upload, and again if your EU Ecolabel trajectory is opened later.

Your answer itself does not change. You will see text in the comment field that you didn’t type yourself, in a block starting with a marker like [Green Key gk2022 4.1]: the Green Key version and the criterion number. If you adjust that block, your version will remain, even if the report is read again later. If you leave it untouched, it will be replaced during a new reading. Reading it twice does not result in duplicate text.

In the document file, you can see how many criteria were read from the report, for example “Green Key report read: 123 criteria, 90 with yes”.

Text suggestions

For sixteen statements, we have prepared text — a maintenance program, a towel policy, a temperature policy, guest information about water hardness. This text is built from your own data, so there are no generalities where a figure can be shown. You review them, adjust what is incorrect, and click Confirm as answer. This fills in the answer and the text itself serves as evidence. You can still adjust or regenerate them later.

Gatekeeper questions

Some questions determine whether the rest still makes sense. If you answer that you have no outdoor heating, the follow-up questions about it will disappear. This works both ways: if you change your answer, they will return.

Per reporting year

Your answers belong to a reporting year. This means that a renewal next year doesn’t start with an empty file, and your previous application remains as you submitted it.

Next to a criterion, you’ll sometimes see two small icons: a question mark leading to the background page about that theme on our site, and a chat icon leading to the forum. If the link is missing, the icon won’t appear.

Evidence and documents

Laatste update: 02/11/2026

A statement without evidence won’t get you through any audit. For a large part of the 142 statements, the authority wants to see a document: a certificate, a contract, an invoice, a policy text, or a photo. The module keeps track of which document serves which purpose.

Linking evidence

Next to each statement is a paperclip showing the number of linked documents. This opens a panel with three options: choose an existing document from your accommodation, register a link, or upload a file. You can uncouple them using the cross; the document itself will remain.

One document can be attached to multiple statements. Your maintenance contract often serves three or four criteria, so you only need to upload it once.

Linking evidence does not automatically set the statement to ‘in order’. That remains your answer. Conversely, for a completed statement with a documentation requirement, the module shows a soft tag evidence still to be provided as long as nothing is attached.

What the module does with your documents

Every document you upload is read and given a short summary: what kind of document it is, what date it’s from, and what it contains per theme. This summary also feeds into your sustainability report.

In addition, the document is given tags from a fixed list — invoice, contract, certificate, policy, logbook, website. These tags determine which criteria we measure the document against. If the tags aren’t right, you can adjust them; the analysis will then run again with the correct focus.

Confirming AI suggestions

If the analysis finds something, the statement will say: possible evidence in your documents, with the name of the document, a certainty percentage, and the literal fragment from the text it’s based on. That fragment is checked by the server: if it’s not actually in the document, the suggestion disappears. This is how we prevent the AI from making up something that looks good.

You confirm with Confirm as evidence, or you reject with Not this evidence. Only a confirmed suggestion becomes actual evidence. Confirmations and rejections are logged so that suggestions can be improved.

Scans

A scanned PDF contains no text, only an image. We automatically process such documents up to thirty pages. This isn’t free, in terms of money or energy, so you start larger scans yourself. After processing, the regular analysis is run over it.

Validity and versions

You can add a valid until date to a document. For an EPC, we pre-fill this for ten years. If a newer document replaces an old one, use the new version button: the links to the criteria remain and the old version stays in the history. If you delete a document that supports criteria, the module will warn you which ones they are.

Worksheets and checklists

Laatste update: 02/11/2026

Some criteria require a percentage: at least 40 percent of your light sources must be energy-efficient, at least 90 percent of your appliances in the correct energy class, and at least 80 percent of your cleaning products must have an ecolabel. You can’t calculate such a percentage off the top of your head. That’s why those criteria include a worksheet that does the math for you.

How a worksheet works

You fill in what you have, the worksheet calculates the percentage live, and tells you if you meet the threshold. Then you click Done and three things happen: the corresponding declarations are answered — including with a no if you are below the threshold — and your count is saved as a text document and linked to those declarations as proof. You can save your progress at any time.

That last part is the whole point of a worksheet: not just the answer, but also the supporting evidence you can use to defend it.

The seven worksheets

WorksheetCriterionWhat you fill in
Lighting per room8.1, 8.2, 8.3The number of light sources per room, how many of them are energy-efficient, and whether the room is lit for more than five hours a day. Calculates the 40 and 50 percent thresholds.
Energy-efficient appliances31.1, 31.2Whether you reach 50 or 90 percent per category (cooling, oven, dishwasher, washing machine, dryer, vacuum cleaner, office equipment, lamps). The required energy class is listed next to the name.
Sustainable goods52.1Categories where at least 40 percent carry an EU Ecolabel or other ISO type I label.
Paper products51The five paper categories from the decree.
Cleaning products and toiletries54.1Categories where at least 80 percent carry an ecolabel.
Staff social benefits61.1Which social benefits your staff receive.
Eco-friendly means of transport63.1The three means of transport listed in the decree.

A category you don’t have doesn’t count toward the denominator. You fill in eighteen identical rooms as one row with a quantity, not as eighteen separate rows.

A room with many lamps

The lighting worksheet includes a detail that is easily misunderstood. Criterion 8.3 isn’t about all your lamps, but about the rooms that are lit for more than five hours a day. If you don’t have any such rooms, then that criterion is not applicable and will be marked as met. So only check that box where it’s actually the case.

If you don’t meet a threshold, the worksheet will honestly answer ‘no’ and you’ll see the criterion reappear in your points for improvement. This is useful information: it tells you exactly how many lamps or appliances you still need to replace to get there.

Your goals and next steps

Criterion 1 includes a different kind of worksheet: not a count, but a list of what you want to achieve. The decree requires an action program with goals (1.3), established at least every two years (1.4). With + Add goal, you set a goal with a title, a target, a target year, at least one theme, and a status update. A goal can take three forms:

  • Without a figure, for example “more and better feedback from guests”.
  • Key figure from my footprint: CO₂, energy, water, or share of renewables. The platform remembers your starting point and calculates your progress itself.
  • Custom figure: something the platform doesn’t measure, such as the share of guests arriving by train. You track this figure yourself.

With 🔍 Search goals in my documents, the platform looks for goals in your uploaded documents and your website. Anything it finds is immediately added to the list as a goal without a figure, highlighted with a yellow border and a note indicating which document it came from. Review these and adjust them where necessary.

1.3 and 1.4 are not checked off automatically: that remains your declaration to the certification body. To do this, click Confirm as answer to 1.3 and 1.4. The overview will then be linked as a supporting document, and all your active goals will be given today’s date. If they are older than two years, the worksheet will ask you to reconfirm them.

Your goals also appear in your sustainability report and in the biennial reporting package. See Report and infographic.

Mandatory, optional, and the threshold

Laatste update: 02/11/2026

The EU Ecolabel works with two types of criteria. You must meet all 22 mandatory criteria. The 45 optional criteria earn you points, and you need at least 32. Both must be correct: 40 points with one missing mandatory criterion will not get you the label.

The mandatory criteria are a gateway

No compensation is possible. That is why the number of mandatory criteria not yet in order is shown in red on your dashboard, rather than as a percentage: a percentage suggests you are almost there, which is misleading for a gateway.

Points for optional criteria

Each optional criterion has a ceiling. Some criteria have tiers: if 50 percent of your appliances are in the correct class, that’s half a point; if you reach 90 percent, it’s a full point. For a criterion with alternative paths, the highest one counts, not the sum. Points you can still earn are listed per theme card as remaining.

Three criteria have a gateway question that sets the entire criterion to zero if you answer no. For example, with 61.2: if you don’t update your social policy annually, the points you collected with 61.1 are also forfeited. The same applies to 38.1 and 59.1. This isn’t a penalty from us; it’s how it’s written in the formulas of the official verification form.

Finished is not the same as in order

This is the most important calculation to understand.

TermMeaning
FinishedYou have reviewed and answered all declarations for that criterion. It is ready to be submitted.
In orderYour answers also mean that you meet the criterion.
Point for improvementFinished, but not met. For a mandatory criterion, this is a blocker; for an optional one, it’s a missed opportunity.

A file can therefore be 100 percent finished and still not be ready to submit. That seems contradictory, but the alternative is worse: if “finished” meant the same as “in order,” you would only make progress by answering yes. That is exactly what you don’t want in a file that an auditor will come to check.

Points for improvement

On the dashboard, there is a card with all criteria that are finished but not met: red for mandatory, amber for optional, with a button leading to the criterion. This is your task list. For an optional criterion, it shows how many points you can still earn, so you can choose between three small ones and one large one.

The submission package

Laatste update: 02/11/2026

The submission package is the final step: one zip file containing the official verification form and all your supporting documents, ready to be submitted to the competent authority.

Where to find it

  1. Go to your accommodation’s dashboard.
  2. At the bottom, you will see the Submission package card.
  3. First, fill in the application details, then select Generate submission package (zip).

What’s inside

The official verification form. We use the exact JRC form, not our own version of it. The module only fills in the answer cells; all formulas, dropdown lists, and formatting remain untouched so that the authority recognizes the file and the built-in compliance check works correctly. If you open it in Excel, it recalculates itself.

The supporting documents. All documents you have linked to declarations, numbered, with a MANIFEST.txt file stating which number belongs to which declaration. Confirmed template texts only become actual text files at this stage.

Consumption tables. The sheet with consumption figures is populated from your measurement data: electricity, guest nights, your own solar or wind energy, total kWh, water, and surface area excluding your private section. The sheet calculates the key figures below that automatically.

The application details

A block of fields that goes directly into the application form: company name, legal representative, contact, company category (micro, SME, national or international chain), number of locations for a chain, turnover estimate, and whether you are applying for a discount based on EMAS or ISO certification. We fill in the place and date of signing ourselves.

The manifest check

Before generating, the module checks for what is missing: unanswered declarations and declarations with mandatory documentation but no evidence. This is a warning, not a block. You can always generate the file. The reason is simple: sometimes you provide a document separately, or you have made an agreement with the authority. We are not going to decide that your file cannot be submitted.

What you still need to do yourself

Stamp and signature. We cannot provide these, and they are on the list of things you complete by hand. Afterwards, you submit to the FPS Public Health via ecolabel.be.

Regenerate after every substantive change. The form is a snapshot of your answers, and a file in which the form and your evidence no longer match will take more time during the assessment.

EU Ecolabel: what the label requires

Laatste update: 02/11/2026

The EU Ecolabel is the official environmental seal of the European Union — the flower logo you also see on cleaning products, paper, and textiles. For tourist accommodations, the criteria are set out in Decision (EU) 2017/175. That decision is the source of everything this module asks of you.

The structure

Criteria67, divided into seven themes
Individual statements142 — that is what you fill in on the form
Mandatory22 criteria, all 22 must be met
Optional45 criteria, at least 32 points required
Largest themeEnergy & CO₂, 21 criteria
Smallest themeGuests & communication, 2 criteria

The mandatory criteria cover the basics: an environmental policy with objectives, consumption monitoring, maintenance, energy-efficient lighting, water-efficient toilets, waste separation, and guest information. The optional criteria are where you distinguish yourself: renewable energy, heat recovery, rainwater, ecolabels on your purchases, local food, and biodiversity.

What the label does not cover

EU Ecolabel is an environmental label. Social criteria are limited and only just expanding; there is nothing about cultural heritage. If you find the latter important, Green Key is broader — see the selection guide.

What it costs

For a micro-enterprise, the application is approximately 350 euros one-time, with no annual fee. For an SME, this increases to approximately 600 euros one-time plus approximately 600 euros per year. The amounts are taken from the EU fee table of February 2026, excluding VAT and without subsidies.

Being a micro-enterprise or an SME therefore makes the difference between paying once and paying every year. Micro means fewer than ten employees and less than two million euros in turnover. If you are in doubt, do not rely on the estimate based on your rooms but look it up — the module only uses your rooms as a rough proxy.

The process

  1. Preparation — compiling the file and evidence. That is what this module does.
  2. Registration and submission — registering with the competent authority and submitting the application with the application fee.
  3. Assessment and site visit — the authority assesses the file, including an on-site inspection.
  4. Award — upon approval, you may use the logo.
  5. Follow-up — periodic monitoring, with potential inspection or annual costs.

In Belgium, the competent authority is the FPS Public Health, Food Chain Safety and Environment, via ecolabel.be.

Two things we don’t know for sure: exactly how often the follow-up inspection occurs, and whether the micro-rates remain unchanged after the first license period. Check this with the authority before you count on it.

Why a site visit is necessary

It is the step that makes the label credible. A file can be correct on paper while the reality is different. That is also why this module never claims “compliance” and why it lets you answer with no: a file that looks better than your accommodation will fail during that visit and cost you time and money.

Fairhospitality, gastvrijheid die onze bezoekers, onze plek en onszelf laat bloeien
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.